Browse Rewards > Electronics > Car Audio > XMZZR3301
Class D, Mono Subwoofer Amplifier
XMZZR3301
Features 330W RMS (20Hz-200Hz 1.0% THD+N, at 4 Ohms, 14.4V)1 This unit has a maximum output power of 600W per chan... More
Sony Rewards Price: 19,999 points
Want a better price? Log in to see if there's a cardmember deal.
Don't Have Enough Points? You can still get the products you want by purchasing a points package when you get to the shopping cart!
Features
- 330W RMS (20Hz-200Hz 1.0% THD+N, at 4 Ohms, 14.4V)1
- This unit has a maximum output power of 600W per channel at 4 Ohm.
- 600W RMS (50Hz 1.0% THD+N, at 2 Ohms, 14.4V)
- This unit has a maximum output power of 1100W per channel at 2 Ohm.
- Direct connection (High Level Input)can be made with the speaker output of your car audio unit if it is not equipped with RCA line output.
- High Level Sensing power on feature allows the unit to be activated without the need for remote connection.
- Built in variable 12 dB/Oct LPF (Low Pass Filter) from 50-300Hz enables users to concentrate the power on lower frequencies.
- Variable 6-70Hz sub-sonic HPF (High Pass Filter) 12dB/Oct.
- Variable 0-10 dB 40Hz bass boost provides additional bass response at lower frequencies (rear channels only).
Footnotes
1.CEA-2006 Compliant — Standardized “Voluntary” Testing & Measurement Methods for Mobile Audio Amplifiers. This standard advocates a uniform method for determining an amplifier’s RMS power and signal-to-noise ratio. Using 14.4 volts, RMS watts are measured into a 4-ohm impedance load at 1 percent Total Harmonic Distortion (THD) plus noise, at a frequency range (for general purpose amplifiers) of 20 Hz to 20,000 Hz.
- 330W RMS (20Hz-200Hz 1.0% THD+N, at 4 Ohms, 14.4V)1
- This unit has a maximum output power of 600W per channel at 4 Ohm.
- 600W RMS (50Hz 1.0% THD+N, at 2 Ohms, 14.4V)
- This unit has a maximum output power of 1100W per channel at 2 Ohm.
- High Level Input with Sensing Power On
- Variable 6-70Hz sub-sonic HPF (High Pass Filter) 12dB/Oct.
- Subsonic Filter
- Bass Boost
| Max power output | 1100W max power | |
| Power Ad Hoc | 330W at 4 Ohm from 20Hz-200Hz with < 1% THD1 | |
| Speaker Impedance | 2-8 Ohm stereo 4-8 Ohms mono | |
| Band | Low Pass Filter: 50-300Hz, -12dB/Oct | |
| Circuit System | Class D Technology Pulse Power Supply | |
| Frequency Response | 10-300kHz (+/-0dB) | |
| Harmonic Distortion | 0.1% or less (50Hz) | |
| Impedance | 2-8 Ohms mono | |
| Input Level | 0.3-6.0V (RCA pin jacks) 6.5-16.0V (High Level input) | |
| Low Boost | 0-10dB (40Hz) | |
| Noise Level | 65 dBA | |
| Power Supply | Class D Technology Pulse Power Supply | |
| Signal Circuitry | 6-70Hz Variable -12 dB/Octave Subsonic filter | |
| Level Control | High Level Input: 6.5 - 16V | |
| Audio In | RCA Pin Jacks, High Level input connector | |
| Audio Out | Speaker Terminals | |
| Input(s) | RCA Pin Jacks and High Level Speaker Input Connector | |
| Line Level Input(s) | RCA pin jacks | |
| Output(s) | Speaker Terminals | |
| RCA Audio Input(s) | Pin Jacks: 0.3 - 6V | |
| Current Drain | At rated output: 60A (at 2 Ohms) Remote Input: 1 mA | |
| Input Voltage | 10.5-16V Power Supply Voltage | |
| Internal Power Supply | Class D Technology Pulse Power Supply | |
| Output Power | Maximum Output: 600W (at 4 Ohms); 1100Wx1 (at 2 Ohms) | |
| Power Requirements | 12V DC Car Battery (Negative Ground) | |
| Rated Output | 330W RMS (20 Hz - 200 Hz, 1.0% THD + N, at 4 Ohms, 14.4V)1 600W RMS (100 Hz, 1.0% THD + N, at 2 Ohms, 14.4V) | |
| Impedance | 2-8 Ohms mono | |
| Speaker Terminal Type | Gold plated terminals | |
| Dimensions (Approx) Depth | 11" | |
| Dimensions (Approx) Height | 2-1/4" | |
| Dimensions (Approx) Width | 14-1/8" | |
| Dimensions (Approx.) | 14 1/8 x 2 1/4 x 11" (357 x 55 x 277 mm) | |
| Weight (Approx.) | Approx. 2.9kg (6lb 7oz) not included |
- Mounting Screws (4)
- High Level Input Cord
- Protection Cap